lux pro4 — 1200TVL Analog FPV Camera
The QINKOFPV lux pro4 combines a 1/4.3-inch CMOS sensor with 1200TVL horizontal resolution and CVBS analog video output. Its 16:9 image format provides a field of view of 90° horizontally and 45° vertically for compatible FPV drone systems.
With a manufacturer-specified camera latency of 30ms or less, selectable PAL or NTSC operation and OSD menu support, lux pro4 provides configurable analog video for your FPV setup. Automatic white balance, automatic electronic shutter and 2D noise reduction support image adjustment as scene conditions change.
The camera accepts a 5–24V DC supply and draws a specified 50mA at 12V. A 19 × 19 mm body profile and 25.2 mm overall depth, including the rear connector projection, provide clear dimensions for checking installation space.
Key Features
-
1200TVL horizontal resolution: paired with a 1/4.3-inch CMOS sensor and 3.0 µm pixels.
-
16:9 image format: with a 90° horizontal and 45° vertical field of view.
-
Camera latency of 30ms or less: according to the manufacturer specification.
-
PAL/NTSC selectable: configure the video standard to match compatible analog equipment.
-
5–24V DC input: operating current specified at 50mA with a 12V supply.
-
2D noise reduction: with automatic white balance and electronic shutter.
-
OSD menu support: configure camera settings through an external menu controller, with English and Chinese menu options.
-
Compact body profile: 19 × 19 mm, with a 25.2 mm overall depth including the rear connector projection.
Technical Specifications
lux pro4 Camera Specifications
| Brand |
QINKOFPV |
| Product Name |
lux pro4 |
| Camera Type |
Analog FPV Camera |
| Image Sensor |
1/4.3-inch CMOS |
| Horizontal Resolution |
1200TVL |
| Pixel Size |
3.0 µm |
| Aspect Ratio |
16:9 |
| Video Output |
CVBS Analog Video |
| Video Standard |
PAL / NTSC Selectable |
| Field of View |
Horizontal: 90° / Vertical: 45° |
| Specified Camera Latency |
≤30ms |
| Minimum Illumination |
0.01 lux at F2.0, manufacturer specification |
| Noise Reduction |
2D |
| Electronic Shutter |
Auto |
| White Balance |
Auto |
| Scene Modes |
Auto / Color / B&W / EXT |
| OSD Menu |
Supported |
| Menu Languages |
English / Chinese |
| Operating Voltage |
5–24V DC |
| Operating Current |
50mA at 12V |
| Body Profile |
19 × 19 mm |
| Depth Excluding Rear Connector Projection |
23.6 mm, as shown in the product drawing |
| Overall Depth Including Rear Connector Projection |
25.2 mm, as shown in the product drawing |
| Operating Temperature |
-20°C to +70°C |
Connections and OSD Settings
lux pro4 uses a 3-pin connector for power, ground and CVBS video output, plus a separate 2-pin connector for OSD control and ground. An external menu controller connects to the OSD interface for camera configuration.
Confirm connector orientation, polarity and wiring against the supplied diagram before applying power. Keep the camera supply within the specified 5–24V DC range.
Compatibility and Installation
Use lux pro4 with video equipment that accepts CVBS analog input and supports the selected PAL or NTSC standard. Check the mounting arrangement and allow sufficient clearance for the lens, rear connectors and wiring.
Minimum illumination and camera latency are manufacturer specifications. Actual image quality depends on lighting and camera settings. Total viewing-system latency also depends on the transmitter, receiver and display.
