lux pro3 — 1800TVL Analog FPV Camera
The QINKOFPV lux pro3 combines a 1/2.8-inch CMOS sensor with 1800TVL horizontal resolution and CVBS analog video output. Its 16:9 image format provides a field of view of 109° horizontally and 61° vertically for compatible FPV drone systems.
For low-light and backlit scenes, lux pro3 features Super WDR (HDR), 3D noise reduction and a manufacturer-specified minimum illumination of 0.0001 lux at F1.6. WDR helps retain visible detail across bright and shadowed areas, while automatic white balance and electronic shutter adapt to changing scene lighting.
With a specified camera latency of 30ms or less, selectable PAL or NTSC operation and OSD menu support, lux pro3 offers configurable video for analog FPV builds. Its listed module dimensions of 27 × 19 × 19 mm provide a compact installation envelope.
Key Features
-
1800TVL horizontal resolution: paired with a 1/2.8-inch CMOS sensor and 2.9 µm pixels.
-
109° horizontal field of view: with a 61° vertical view and 16:9 image format.
-
Low-light sensitivity: specified minimum illumination of 0.0001 lux at F1.6.
-
Super WDR (HDR): helps preserve scene visibility in mixed lighting and backlit environments.
-
Camera latency of 30ms or less: according to the manufacturer specification.
-
3D noise reduction: with automatic white balance and electronic shutter.
-
PAL/NTSC selectable: configure the video standard for compatible analog equipment.
-
OSD menu support: adjust camera settings using an external menu controller, with English and Chinese menu options.
Technical Specifications
lux pro3 Camera Specifications
| Brand |
QINKOFPV |
| Product Name |
lux pro3 |
| Camera Type |
Analog FPV Camera |
| Image Sensor |
1/2.8-inch CMOS |
| Horizontal Resolution |
1800TVL |
| Pixel Size |
2.9 µm |
| Aspect Ratio |
16:9 |
| Video Output |
CVBS Analog Video |
| Video Standard |
PAL / NTSC Selectable |
| Field of View |
Horizontal: 109° / Vertical: 61° |
| Specified Camera Latency |
≤30ms |
| Minimum Illumination |
0.0001 lux at F1.6, manufacturer specification |
| Wide Dynamic Range |
Super WDR (HDR) |
| Noise Reduction |
3D |
| Electronic Shutter |
Auto |
| White Balance |
Auto |
| Scene Modes |
Auto / Color / B&W / EXT |
| OSD Menu |
Supported |
| Menu Languages |
English / Chinese |
| Operating Current |
40mA at 12V |
| Listed Module Dimensions |
27 × 19 × 19 mm |
| Operating Temperature |
-20°C to +70°C |
Connections and OSD Settings
lux pro3 uses a 3-pin connector for power, ground and CVBS video output, plus a separate 2-pin connector for OSD control and ground. An external menu controller connects to the OSD interface for camera configuration.
Confirm the approved supply voltage, connector orientation, polarity and wiring before applying power.
Compatibility and Installation
Use lux pro3 with video equipment that accepts CVBS analog input and supports the selected PAL or NTSC standard. Check the mounting arrangement and allow sufficient clearance for the lens, rear connectors and wiring.
Low-light sensitivity and camera latency are manufacturer specifications. Actual image quality depends on scene lighting and camera settings. Total viewing-system latency also depends on the transmitter, receiver and display.
